- VTA97011-00
- 800W, AC/DC Multi-Channel Power Supply
-
- FEATURES
-
- - Up to 800 Watts Output Power
- - MIL-STD-704D, 115VAC, 3¯, 400Hz
- - 5 Channels @ < 3mV Ripple
- - High Input/Output Isolation
- - Continuous Short Circuit Protection
- - Thermal Protection @ 80¡C
-
- This AC/DC Power Supply used in aircraft high power applications features a low profile package of 16.20Ó L x 12.50Ó W x 3.0Ó H or
- 1.32Watt/in3. It has excellent load regulation, input filtering, and low output ripple as well as current limiting/thermal shutdown.
-
- Input Specifications:
- Steady State Voltage................................................ 108 to 118 VAC, 3¯
- Surge Voltage.......................................................... 88 VAC and 160 VAC for 0.2 sec
- Frequency................................................................ 400 ± 20 Hz
- Inrush Current......................................................... 6 A peak maximum per phase
- Isolation (input/output to chassis)............................. >10 Megohm @ 500Vdc
- Power Factor............................................................ > 95% @ Full Load
-
- Output Specifications:
- Nominal Nominal DC Load Ripple Nominal
- Voltage Current Regulation & Noise Power
- +5.0(VX) VDC 30.0 A ±5% < 50 mVp-p 150W
- +12.0 VDC 1.0 A ±5% < 50 mVp-p 12W
- -12.0 VDC 4.0 A ±5% < 50 mVp-p 48W
- -2.0 VDC 54.0 A ±5% < 50 mVp-p 108W
- - 4.5 VDC 47.0 A ±5% < 50 mVp-p 211W
- +15(VX) VDC 1.3 A ±5% < 50 mVp-p 20W
- +48 VDC 1.0 A ±5% < 100 mVp-p 48W
- +20 VDC 1.1 A ±5% < 3 mVp-p 22W
- +5.0 VDC 4.0 A ±5% < 3 mVp-p 20W
- - 5.2 VDC 3.0 A ±5% < 3 mVp-p 16W
- +15(VX) VDC 3.2 A ±5% < 3 mVp-p 48W
- -15(VZ) VDC 3.2 A ±5% < 3 mVp-p 48W
- Output Specifications:
- Efficiency................................................................. > 80% @ Full Load.
- Over-voltage Protection ........................................... Any channel between 15% and 25% of nominal voltage. Reset by re-cycling AC Power.
- Short Circuit Protection ............................................ Current limiting between 105% and 125% on all channels.
- Inhibit Lines.............................................................. TTL compatible. Logic Ò0Ó shuts down all channels (except +15VX channel).
- Remote Sensing......................................................... Available on all channels
- Thermal Protection.................................................... PSU shuts down @ Baseplarte Temperature of 80¡C. Automatic restart at safe temperature
- with 10¡C differential to prevent power supply ÒÒmotor-boatingÓ.Ó.
- BITE Status (IEEE 1014-87)..................................... Provides SYS-FAIL,, BITE, ACFAIL and SYSRESET status signals. (TTL compatible).
-
- Physical Specifications:
- Weight..................................................................... <17.5 lbs or 7.9 kgs
- Case......................................................................... Aluminum alloys
- Finish....................................................................... Allodyne chemical film
- Cooling Method....................................................... Conduction cooling
- Connections............................................................. JA: I/P Power, DBMC5H5PJK87, JB: O/P Digital, DCM37STA197,
- ................................................................................ JC: O/P Analog, DDM24W7SA197 ,Post, Terminal Block
- Mounting................................................................. 6x 1/4Ó Ð 20 UNC-2B Blind Insert
-
- Environmental Specifications:
- Temperature, Operating........................................... -40¡C to +70¡C
- Temperature, Non-Operating................................... -55¡C to +85¡C
- Humidity................................................................. 5% to 95%, non-condensing.
- Altitude, Operating................................................... Sea Level to 40,000 ft.
- Shock...................................................................... MIL-STD-810D, Method 516.3, Procedure I, Functional shock, 40gÕs.
- Vibration................................................................. MIL-STD-810D, Method 514.3, Procedure I, Category 6, 20 gÕs.
- EMC/EMI Compatibility (MIL-STD-461/462)......... CE101, Conducted Emissions, Power Leads
- CE102, Conducted Emissions, Power Leads
- CS101, Conducted Susceptibility, Power Leads
- RE102, Radiated Emissions, Electrical Field
- Predicted Reliability (MIL-HDBK-217F)................. >20,000 hours AUC
